Python code for talking to character based LCDs.
The I2c_Lcd class allows for talking to i2c based LCDs. There are also variants of the code for MicroPython. All of the files which start with pyb were tested on the pyboard.
| File | Description |
|---|---|
| lcd.py | Core logic |
| i2c_lcd.pyb | Linux I2C HAL |
| pyb_gpio_lcd.py | Pyboard GPIO HAL |
| pyb_gpio_lcd_test8.py | Pyboard test using 8-bit GPIO |
| pyb_gpio_lcd_test.py | Pyboard test using 4-bit GPIO |
| pyb_i2c_adafruit_lcd.py | Pyboard I2C HAL for Adafruit backpack |
| pyb_i2c_adafruit_lcd_test.py | Test for Adafruit backpack |
| pyb_i2c_lcd.py | Pyboard I2C HAL for PCF8574 backpack |
| pyb_i2c_lcd_test.py | Test for PCF8574 backpack |
| nodemcu_gpio_lcd.py | NodeMCU GPIO HAL |
| nodemcu_gpio_lcd_test.py | NodeMCU test using 4-bit GPIO |
The files which end in _test.py are examples which show how the corresponding file is used.
i2c_lcd.py was tested on a BeagleBone Black using a 2 x 16 LCD with an i2c module similar to this one.
This code was adapted from some C code that I had written previously for the AVR.
To install on your BBB:
git clone https://github.com/dhylands/python_lcd.git
cd python_lcd
sudo pip install -e .And to test:
sudo lcd/i2c_lcd.pySince my LCD was a 5v device, I used a level converter to convert from BBB's 3.3v to the LCD's 5v.
I put together some [photos here] (https://picasaweb.google.com/115853040635737241756/PythonI2CLCD?authkey=Gv1sRgCLyZoJ3_uPjiXA)
Coming from the BeagleBone Black the wire colors are:
Color Pin Name
------ ----- ------
Black P9-1 GND
Red P9-3 3.3v
Orange P9-7 SYS_5V
Yellow P9-19 SCL
White P9-20 SDA
The photo shows Orange connected to P9-5. I discovered that P9-7 is controlled by the onboard voltage regulators, so when you do a "sudo poweroff" then SYS_5V drops to 0v when the BBB is powered off. P9-5 (VDD_5V) remains at 5v after the BBB is powered off.
And the colors going to the LCD are:
Color Name
------ ----
Black GND
Red 5v
White SDA
Yellow SCL
I used a SparkFun level shifter (this particular model is no longer available).
Some examples of other level shifters which could be used: