Sitemongoose

Sitemongoose is a simple, lightweight and zero-dependency site monitoring tool written in Go. It is useful for

• Monitoring Website Availability: check if your websites are up and running by sending periodic HTTP requests. You can define expected Status Codes and send alerts if the server's response differs.
• Tracking Response Times: measure the response time of your websites to ensure they are performing optimally, or send alerts otherwise.
• Evaluating JSON Responses: define rules to evaluate JSON responses from your APIs and trigger alerts based on conditions such as value comparisons or key existence.
• Alerting: Sitemongoose can send alerts based on specific conditions. The following alerting channels are currently available:
  • Email
  • Slack
  • Pushover
  • Custom command: run a shell command in case of an alert is riggered

Install

Sitemongoose is a single binary executable without any dependencies. Just download, extract and mark it as executable:

wget https://github.com/neilsf/sitemongoose/releases/download/v0.1.0/sitemongoose-0.1.0_linux_x86_64.tar.gz
tar -xzvf sitemongoose-0.1.0_linux_x86_64.tar.gz
rm sitemongoose-0.1.0_linux_x86_64.tar.gz
chmod +x sitemongoose
./sitemongoose --help

Configure

To use Sitemongoose, you must define Monitors, Events and Alerts in a configuration file, in YAML format.

Example configuration

monitors:
  - name: Example Monitor
    url: http://example.com/health.json
    interval_sec: 60
    timeout_ms: 5000
    events:
      - evaluate: status_code
        expected_status_code: 200
        alerts:
          - channel: email
            from: [email protected]
            to: [email protected]
            alert_message: "Example.com is down!"
            resolution_message: "Example.com is back up."
      - evaluate: response_time
        expected_response_time_ms: 1000
        alerts:
          - channel: pushover
            alert_message: "Example.com is slow!"
            resolution_message: "Example.com is fast again."
      - evaluate: json_rule
        json_rule:
            json_path: "database.connections"
            condition: "lt"
            value: 500
        alerts:
          - channel: custom_cmd
            alert_command: "/path/to/alert_script.sh"
            resolution_command: "/path/to/resolution.sh"

Run

To start monitoring, invoke Sitemongoose's start command and specify the location of the configuration file:

./sitemongoose start -c /path/to/config.yaml

In a production environment, you may want to run it as a service, using systemd or Supervisor.

Complete Configuration Reference

A Sitemongoose configuration consists of three main building blocks:

1. The configuration must have one or more Monitors
2. A Monitor has zero or more Events
3. An Event has zero or more Alerts

Monitors

A Monitor is the top level building block of the configuration. It defines a service that runs in a loop, sending periodical HTTP requests to an URL and firing Events. You can define as many Monitors as you wish. A Monitor has the following configuration options:

• name (mandatory): an arbitrary string that is unique, i. e. no other monitors can have the same name.
• url (mandatory): the URL that the monitor will send HTTP requests to.
• interval_sec (mandatory): an integer denoting how many seconds must elapse between two requests.
• timeout_ms (optional): an integer denoting the time in milliseconds before the request is considered to time out. The default value is 30000, that is, 30 seconds.
• events (optional): an array of _Event_s, see below.

Events

After sending an HTTP request, the Monitor passes the response to all of its Events. It's the Event's responsibility to evaluate the response and decide whether it should take any actions. An Event has the following configuration options:

• evaluate (mandatory) defines what to evaluate. Valid values are: status_code, response_time and json_rule. Other options differ based on the setting.

Status Code Evaluation

For evaluate: status_code, the only other option is expected_status_code, an integer that's matched against the response's status code. If the numbers mismatch, the Event's all Alerts will be fired.

The following example sends an alert if the response's status code does not equal 200 (note: Alerts will be discussed later):

monitors:
  - name: Example Monitor
    url: http://example.com/health.json
    interval_sec: 10
    events:
      - evaluate: status_code
        expected_status_code: 200
        alerts: ...

Reponse Time Evaluation

For evaluate: response_time, the only other option is expected_resposne_time_ms. If the server's response time is greater than this number, or a timeout occurs, the alerts will be fired.

The following example sends an alert if the response time is greater than 500 millisecs:

monitors:
  - name: Example Monitor
    url: http://example.com/health.json
    interval_sec: 10
    events:
      - evaluate: response_time
        expected_response_time_ms: 500
        alerts: ...

Note: there must be at least one Event with evaluate: response_time, otherwise nothing will be fired in case of a timeout.

JSON Rule Evaluation

Sitemongoose can take actions based on the response body the server provides. If evaluate: json_rule, another block called json_rule must be defined with the following options:

• condition (required): the conditions that the returned JSON must satisfy to avoid an alert. Valid options are:
  • valid: the returned response must hold a valid JSON, otherwise an alert will be sent
  • exists: the key defined by json_path must exist
  • eq: the numeric value found at json_path must equal to the value defined in value
  • ne: the numeric value found at json_path must not equal to the value defined in value
  • lt: the numeric value found at json_path must be less than to the value defined in value
  • gt: the numeric value found at json_path must be less than to the value defined in value
  • regexp: the string value found at json_path must match the regular expression defined in value
• json_path (mandatory except if condition: valid): see JsonPath for valid syntax
• value (mandatory except if condition: valid): the value can be of any type (a number, string or boolean) but certain conversions will take place when comparing against the response.
  • If checked for equality or inequality (eq or ne), values will be compared as strings. For example, the value null will equal null or "null", but 123.0 will not equal "123".
  • If checked with lt or gt, value must be numeric
  • If checked with regexp, value must be a valid regular expression. For reference, see Go regexp syntax.

In the following example, the event fires, if the value in the JSON response {"database" : {"connections": <value>}} is greater than 300:

monitors:
  - name: Example Monitor
    url: http://example.com/health.json
    interval_sec: 10
    events:
      - evaluate: json_rule
        json_rule:
          condition: lt
          json_path: database.connections
          value: 300
        alerts: ...

Alerts

Events can have multiple Alerts attached to them. When an event condition is met (that is, the response does not meet the expectations), the Event becomes active and all its Alerts are fired. When the condition is over, the Alerts are fired again, but this time, sending a resolution message, letting the user know that the Event is no longer active.

Configuration values:

• channel (mandatory): an Alert's configuration depends on what type we're using. The following channels are currently supported: email, slack, pushover and command.

Email Alerts

For channel: email, the following values are additionally required:

• from (mandatory): the sender's email address
• to (mandatory): the recipient's email address
• alert_message (mandatory): the message to send when the Alert is fired
• resolution_message (mandatory): the message to send when the Event is no longer active

Additionally, the following environment variables must be send to be able to send out emails:

• SMTP_HOST
• SMTP_PORT
• SMTP_USER
• SMTP_PASS

The following example will send an email if the value in the JSON response {"database" : {"connections": <value>}} is greater than 300:

monitors:
  - name: Example Monitor
    url: http://example.com/health.json
    interval_sec: 10
    events:
      - evaluate: json_rule
        json_rule:
          condition: lt
          json_path: database.connections
          value: 300
        alerts:
          - channel: email
            from: [email protected]
            to: [email protected]
            alert_message: "The number of database connections is above 300"
            resolution_message: "The number of database connections is back to normal"

Slack Alerts

Sitemongoose can send alerts to Slack using webhooks. All you need to do is set up a webhook and store the webhook URL in the SLACK_WEBHOOK_URL environment variable.

For channel: slack, the following values are additionally required:

• alert_message (mandatory): the message to send when the Alert is fired
• resolution_message (mandatory): the message to send when the Event is no longer active

Additionally, the following environment variable must be send to be able to send out emails:

• SLACK_WEBHOOK_URL

Pushover Alerts

Pushover is a service that you can use to send push messages to your Android phone or iPhone. Sitemongoose supports Pushover integration out of the box.

For channel: pushover, the following values are additionally required:

• alert_message (mandatory): the message to send when the Alert is fired
• resolution_message (mandatory): the message to send when the Event is no longer active

Additionally, the following environment variables must be send to be able to send out emails:

• PUSHOVER_APP_TOKEN
• PUSHOVER_USER_KEY

See the Pushover API documentation for more details.

Triggering Custom Commands

Sitemongoose can execute shell commands when an Alert is fired. This is essentially the way to implement your own alerting mechanisms.

For channel:command, the following values are required:

• alert_command (required): an array of strings including the command and its arguments
• resolution_command (required): similar to the above, but is executed when the Event becomes inactive

For example, let's say you run Sitemongoose in a desktop environment, and you want to get desktop notifications:

monitors:
  - name: Example Monitor
    url: http://example.com/health.json
    interval_sec: 10
    events:
      - evaluate: status_code
        expected_status_code: 200
        alerts:
          - channel: command
            alert_command: ["notify-send", "-a", "Sitemongoose", "Example.com is down!"]
            resolution_command: ["notify-send", "-a", "Sitemongoose", "Example.com back online"]